Micro Measure IV - Version 5.02 Patch 14

This is a patch for Micro Measure IV version 5.02 for windows only!
Do not load it onto any other version.

!!! This patch should be loaded on top of version 5.021000 (Patch 10)
or later.
 
It does not include prior patches (10 or earlier) since a new build was
created on 9/30/03 MMIV_V502.zip that included all patches up to patch 10.

To check the version:

From the SOI window, click on the "Status Report Display" icon (top right)
The version should show 5.021000 or later.  If not the previous patch should be
loaded first MMIV_V502_Patch10.zip before loading this one.
It can be found at:

ftp://ftp.wilcoxassoc.com/v35beta/mm4/V502_orig/mmiv_v502_patch10.zip.

After this patch is loaded, the version will show 5.021400.

To install the patch:

Unzip to the drive letter mmiv is installed on (c: d: etc.), make sure the "use full path"
option is on in the zip program.

This patch corrects the following:

	Some Avail programs could report the P axis without requesting it.

	Previous fixes: 

	When qualifying tips from a toolchanger rack and using the AQSUB
	subroutine, some tips would not get saved in the tip file.

	When qualifying tips from a toolchanger rack and using the AQSUB
	subroutine, the error "desired record not found" was being displayed
	on the second tool qualification.	

	CONTOUR/TOASCII; command was not creating the output file
	IGES/POINTTOSCAN; command was not creating the output file